Specification
Ceiling Mounted Slim Duct Type (Heat Pump)
| Model name | 25 | 35 | 50 | 60 | |||
| Indoor unit | FDXS25CVMA | FDXS35CVMA | FDXS50CVMA | FDXS60CVMA | |||
| Outdoor unit | RXS25EBVMA | RXS35EBVMA | RXS50FVMA | RXS60FVMA | |||
| Power supply | 1 Phase, 220-240 V, 50 Hz | ||||||
| Cooling capacity1 Rated (Min. – Max.) |
kW | 2.4 (1.2-3.0) |
3.4 (1.2-3.8) |
5 (1.7-5.3) |
6 (1.7-6.5) |
||
| Heating capacity2 Rated (Min. – Max.) |
kW | 3.2 (1.2-4.5) |
4 (1.2-5.0) |
5.8 (1.7-6.0) |
7 (1.7-8.0) |
||
| Power consumption | Cooling1 | kW | 0.69 (0.3-0.92) | 1.09 (0.3-1.27) | 1.65 (0.44-1.93) | 2.13 (0.44-2.49) | |
| Heating2 | kW | 0.91 (0.29-1.49) | 1.18 (0.29-1.79) | 1.92 (0.4-2.04) | 2.32 (0.4-3.18) | ||
| Indoor unit | |||||||
|---|---|---|---|---|---|---|---|
| Airflow rate (H/L) | l/s | 158/133 | 167/142 | 200/167 | 266/225 | ||
| m3/min | 9.5/8 | 10/8.5 | 12-10 | 16/13.5 | |||
| Fan | External static pressure | Pa(mm- H2O) |
40 | ||||
| Sound level (H/L)3 | dB(A) | 35/31 | 37/33 | 38/34 | |||
| Dimensions (HxWxD) | mm | 200X900X620 | 200X1,100X620 | ||||
| Machine weight | kg | 25 | 27 | 30 | |||
| Certified Cooling | CWB | 14 to 28 | |||||
| Operation range Heating | CDB | 10 to 30 | |||||
| Outdoor unit | |||||||
| Colour | Ivory White | ||||||
| Compressor | Type | Hermetically sealed scroll type | |||||
| Motor output | kW | 0.6 | 1.1 | ||||
| Refrigerant charge (R-410A) | kg | 1.0 (Charged for 10 m) | 1.5 (Charged for 10 m) | ||||
| Sound level | dB(A) | 46/47 | 47/48 | 49/49 | |||
| Sound power | Cooling/ Heating3 | dB(A) | 61/62 | 62/63 | 61/62 | 63/63 | |
| Dimensions (HXWXD) | mm | 550X765X285 | 735X825X300 | 735X825X300 | |||
| Machine weight | kg | 34 | 48 | ||||
| Certified | CDB | 10 to 46 | |||||
| Operation range | CWB | -10 to 20 | -15 to 18 | ||||
| Liquid (Flare) | mm | Ø6.4 | |||||
| Piping connections | Gas (Flare) | mm | Ø9.5 | Ø12.7 | |||
| Drain | Indoor unit | mm | VP20 (I.DØ20XO.DØ26) | ||||
| Outdoor unit | mm | Ø18.0 (Hole) | |||||
| Max. interunit piping length | m | 20 | 30 | ||||
| Max. installation level difference | m | 15 | 20 | ||||
| Heat insulation | Both liquid and gas piping | ||||||
Note :
- 1. Rated cooling capacities are based on the following conditions: Suction temp., 27ºCDB, 19.0ºCWB; outdoor temp. 35ºCDB. Equiv. refrigeration piping: 7.5 m (horizontal).
- 2. Rated heating capacities are based on the following conditions: Suction temp., 20ºCDB; outdoor temp. 7ºCDB, 6ºCWB. Equiv. refrigeration piping: 5 m (horizontal).
- 3. Anaechoic chamber conversion value, measured according to JIS parameters and criteria. During operation these values are somewhat higher owing to ambient conditions.
- 4. Numerical values are according to ISO 3741:1999
Ceiling Mounted Slim Duct Type
| Kit name | |||||
| Heat Pump | |||||
| FDXS25CVMA | FDXS35CVMA | FDXS50CVMA | FDXS60CVMA | ||
| Wired remote controller1 | BRC944B2 | ||||
| Wired remote controller code | Length 3 m (shielded wire) | BRCW901A03 | |||
| Length 8 m (shielded wire) | BRCW901A08 | ||||
| 5-room centralised controller2 | KRC72 | ||||
| Adaptor PCB (normal open/normal open pulse contact)3 | KRP413A1S | ||||
| The remote controller loss prevention with the chain | KKF917A4 | ||||
| Interface adaptor for DIII-NET use | KRP928B2S | ||||
| Central remote controller4 | DCS302CA61 | ||||
| Uni ed ON/OFF controller4 | DCS301BA61 | ||||
| Schedule timer4 | DST301BA61 | ||||
| Intelligent Touch Controller4 | DCS601C51 | ||||
| Suction grille | KDGF19A45 | ||||
| Insulation kit for high humidity | KDT25N50 | KDT25N63 | |||
Note :
- 1. 3 m (BRCW901A03) or 8 m (BRCW901A08) length wired remote controller cord is necessary.
- 2. Adaptor PCB is also required for each indoor unit.
- 3. Time clock and other devices ; obtained locally.
- 4. This optional accessory requires KRP928B2S
